Din 741 Malleable Wire Rope Clip , Clamp in rigging hardware

Din 741 Malleable Wire Rope Clip
  • Seller Qingdao Metalent Hardware Products Co., Ltd.
  • Min. Order 1 Piece/Pieces
  • FOB Price US $0.11-11 /Piece

Product Description

1.Material Malleable Iron,Q235,Carbon steel,stainless steel
2.Size 1/8 inch to 3 inch
3.Model Number Malleable Wire Rope Clip
4.Technology Casting and Forging
5.Surface treatments

Electric galvanized, color painting or self color.

Hot dip galvanized

6.Drawings or samples Processing/OEM/ODM service provided.
7.Produce Process

Drawings→ mould making → preforging →rough machining

or finish machining →surface treatment →product checking

and quality control→ packing →delivery

8.Samples We can supply the free samples within 3 days.
9.Packing

Put in gunny bags or cartons and then put on

the pallets or as the requirements of the customers.

10.Term Payment 30% deposite, another 70% paid after faxing the copy of BL;

Step 1. Refer to Table 1 (below left) in following these instructions. Turn back specified amount of rope from thimble or loop. Apply first clip one base width from dead end of rope. Apply U-Bolt over dead end of wire rope – live end rests in saddle (Never saddle a dead horse!) Tighten nuts evenly, alternate from one nut to the other until reaching the recommended torque.
Step 2. When two clips are required, apply the second clip as near the loop or thimble as possible. Tighten nuts evenly, alternating until reaching the recommended torque. When more than two clips are required, apply the second clip as near the loop or thimble as possible, turn nuts on second clip firmly, but do not tighten. Proceed to Step 3.
Step 3. When three or more clips are required, space additional clips equally between first two - take up rope slack - tighten nuts on each U-Bolt evenly, alternating from one nut to the other until reaching recommended torque.
Figure 4. If a pulley (Sheave) is used, in place of a thimble add one additional clip. Clip spacing should be as shown.
Wire Rope Splicing Procedures:
Figure 5. The preferred method of splicing two wire ropes together is to use interlocking turnback eyes with himbles, using the recommended number of clips on each eye (See Figure 1).
Figure 6. An alternate method is to use twice the number of clips as used for a turnback termination. The rope ends are placed parallel to each other, overlapping by twice the turnback amount shown in the application instructions. The minimum number of clips should be installed on each dead end (See
Figure 2). Spacing, installation torque, and other instructions still apply


1. Are you a factory?

Yes, we are a factory which was founded in 1996.

We focus on metal forging and stamping, have 4 production lines with advanced machines over 100 set. Also We have been in good partnership with casting factory, good quality malleable rigging products could be provided.

2. Can you provide the free samples?
Yes, the samples are free, but the freight is on your side.

3. What are your advantages compared with others?
With our own factory to manufacture the products, we can ensure timely products delivery, trustworthy quality and favorable price, that is our advantage.

4. How do you control quality?
With ISO 9001-2008 quality Management System, we control the quality from selecting good material, producing follow the standard, proper inspection of products.

Similar Products

PC Steel Wire
US $600.00-900.00 /Metric Ton
Galvanized Steel Wire
US $0.50-1.50 /Meter
Din 741 Malleable Wire Rope Clips
US $0.10-25.20 /Piece
Qihang JIS DIN ASTM AISI 304
US $5.00-6.00 /Kilogram
ASTM A412 Spiral Ribbed PC Steel
US $450.00-600.00 /Ton
Din 741 Malleable Adjustable Wire Rope
US $0.10-20.00 /Piece
Wholesale All Kinds Of Ultra Thin
US $1.00 /Ton
HENAN JINSHUI Copper PVC Insulated Electrical
US $1.00-10.00 /Meter
DIN 741 Malleable Wire Rope Clip
US $0.20-30.60 /Piece
Din 741 Malleable Wire Rope Clip
US $5.00-50.00 /Piece
Sulphur Cored Wire For Steel Marking
US $950.00-1,000.00 /Ton
Din 741 Type Malleable Wire Rope
US $0.02-1.06 /Piece